Home > Scarves Knowledge > Content

How to Make an Infinity Scarf

Sep 23, 2019

1. Cut the fabric. Cut a 25 inch / 64 cm wide strip of cloth over the entire width of 60 inches / 150 cm.

It is a good idea to pre-wash the fabric before sewing. This will solve any possible shrinkage or chromatic aberration problems.

image

If you need to, just measure a large rectangle from the fabric and you can choose. If you don't use stretch fabric, be sure to make a wider measurement.

2. Place the fabric and fold it. Make the right side facing each other. Match the long sides and fix them together.

image

3. Long side of the seam:

Sewing along the long side. Start at 3 inches / 7.5 cm from one end and maintain a 1/2 inch / 1.2 cm seam.

Iron the seams and open the seams. This will help stitch the stitch into the fabric.

Place the right side of the scarf facing out. Now you will have a "tube" fabric that will form the length of the scarf.

image

4. Sew the short sides together:

Open the short end of the scarf. Align the edge of the short edge with the right side neatly. Fixed in place; you won't be fully fixed and there will be a gap.

Sew the short side into a 1/2 inch / 1.2 cm stitch. Depending on the fabric used, this may require a little effort.

Iron the ends as before.

image

5. Turn the scarf to roll the seam allowance to the inside. There is still a hole (opening). The slip stitch closes the opening.

image

6. Finish. Try it and loop it back and stay comfortable.

image